21. November 2018

FSG Academy at ZF in Friedrichshafen - Media

Category: Academy, 2019, Competition

Last Saturday, 300 students from 72 teams attended the FSG Academy kick-off event for FSG2019 at the ZF Forum in Friedrichshafen. Many thanks to ZF and all involved for the wonderful day! For all who could not attend, we have...

01. November 2018

Free Online Workshop - Aerodynamics and CFD with SimScale

Category: Academy, Workshops, 2018

SimScale and Formula Student Germany are joining forces for the third time to offer a free workshop series about the application of CFD in Formula Student. Participants will receive a hands-on, interactive introduction to the...

21. October 2018

FSG Academy 2018 at ZF in Friedrichshafen

Category: Academy, 2018, Workshops

The yearly FSG academy main event offering support and information to Formula Student teams will be held on Saturday the 17th of November 2018 at ZF in Friedrichshafen. It is open to anyone who is a registered member of a Formula...

12. March 2018

Advanced Concepts in CFD Workshop by SimScale

Category: Academy, Workshops

SimScale partners with Formula Student Germany to offer a free workshop on advanced CFD topics for Formula Student participants.

25. October 2017

FSG Academy 2017 in Herzogenaurach: Slides & Videos are online

Category: Academy, 2017

The yearly FSG academy event offering support and information to Formula Student teams was held on 21st October 2017 at Schaeffler in Herzogenaurach in cooperation with MathWorks. Over 300 students from 66 teams and 8 countries...

05. September 2017

Formula Student Aerodynamics and CFD Workshop

Category: Academy

After last year's huge success, SimScale and Formula Student Germany are again joining forces to offer a revised edition of the free workshop series about the application of CFD in Formula Student. Participants will receive a...

04. August 2017

FSG Academy on Site 2017

Category: Academy, Workshops, Partners

After the successful premiere in 2016, there will also be workshops at the FSG competition in 2017! These workshops will be offered to this years' participants by the sponsors of Formula Student Germany. They will give students...

03. January 2017

Review: Formula Student Aerodynamics and CFD Workshop

Category: Academy

In the last few weeks, the first workshop on aerodynamics and CFD organized by SimScale and Formula Student Germany e.V. took place. A new approach was chosen in order to interlink theory and practice and to provide all...

17. November 2016

Aerodynamic and CFD Workshop

Category: Academy

SimScale and Formula Student Germany are joining forces to offer a free workshop series about the application of CFD in Formula Student. Participants will receive a hands-on, interactive introduction to the fundamentals of Race...

29. September 2016

FSG 2016 Main Workshop at Bosch Engineering GmbH

Category: General, 2016, Academy

The 2016 FSG Workshop will be held at Bosch Engineering GmbH in Abstatt on Saturday the 29th of October. The workshop offers support and information to teams (planning on) participating in Formula Student. Due to the fact that...

03. August 2016

NEW IN 2016: FSG ACADEMY ON SITE IN HOCKENHEIM

Category: General, Academy

FSG Academy offers free workshops from sponsors to the students.

23. February 2016

Pat's Corner - Back to Basics

Category: Pat´s Corner, 2016

I have just returned from Formula Student India, where the importance of re-covering the basics became obvious. We forget the churn of students through Formula Student and often the basics are forgotten when new teams attempt to...

17. September 2015

2015 FSG Workshop at Daimler AG in Sindelfingen

Category: 2015, Academy

The 2015 FSG Workshop will be held at Daimler AG in Sindelfingen on Saturday the 24th of October. The workshop offers support and information to teams (planning on) participating in Formula Student Combustion or Formula...

16. June 2015

Call for Startups at Formula Student Germany 2015

Category: Competition, 2015, Academy

Apply now: FSG offers a stage for one Startup Company again this year to present itself during the competition at the Hockenheimring.

20. April 2015

Pat's Corner - The Money Tree

Category: Pat´s Corner, 2015

I regularly get asked by teams how they can get more sponsorship. No team ever had enough money regardless of their budget and as Formula Student cars get more sophisticated, so the cost of competing increases.  My usual...

02. March 2015

Review on the welding workshop at SLV

Category: Workshops, 2015, Academy

On 13 and 14 February 2015 the annual welding workshop in the SLV Mannheim was held with 30 participants from different formula student teams.After a welcome by Dr. Ludwig Vollrath (FSG) and Mr. Ernst Bauer (SLV) the...

09. January 2015

Welding at Formula Student – the SLV-Workshop - 13th and 14th of February

Category: Academy

The Education and Research Academy for Welding Technology Mannheim Ltd. (SLV) has been responsible for supporting the Formula Student Teams in welding issues since the first Formula Student Germany event at the Hockenheimring in...

18. December 2014

The Fascination of Adhesive Bonding – High-tech Solutions exposed to extreme conditions

Category: Academy

22./23. January and 29./30. January 2015 Henkel Technologiezentrum Garching Under the title “Fascination for bonding – Hightech solutions for extreme conditions” Henkel will organize again two two-day workshops for Formula...

12. December 2014

Pat's Corner - Communication with Judges

Category: Pat´s Corner, 2014

Communication Formula Student was founded with the intention of preparing graduating students for a life in Industry. What is usually quoted is the 'finishing' of young engineer's education by giving them a 'real' project to...

19. September 2014

FSG Media Award Winner 2014

Category: 2014, Academy, FSG Award

Some of you could hardly await the announcement of the media award winner 2014 so let’s go for it: This year again we had many teams that participated on the competition to win the FSG Media Award. Because you all created great...

10. September 2014

2014 FSG Workshop at Continental AG in Hanover

Category: Academy, 2014

The 2014 FSG workshop will be held at Continental AG facility in Hanover on Saturday the 18th of October. The workshop offers support and information to teams (planning on) participating in Formula Student Combustion or Formula...

02. August 2014

Pat's Corner Live @FSG2014

Category: Competition, 2014, Pat´s Corner

This year you can meet our Chief Design Judge Pat - known from many famous article concerning engineering design topics - live in our recreation area on the FSG event site. Pat’s Corner live is the best possibility to discuss...

22. July 2014

Towing Your Trailer Safely

Category: General, 2014, Pat´s Corner

In April 2006, a team from the University of Mankato in Minnesota,  attending FSAE in Michigan, lost control of their trailer in a cross wind and crashed into opposing traffic. Three students were killed and several others...

22. July 2014

Scrutineering Podcasts E05-E09

Category: General, Academy

With just a few days to go until the start of FSG 2014, here are some final tips from the Scrutineers to help this years' competing teams in getting through the technical inspection. From unknotting cable spaghetti, to...

16. July 2014

Some of the Issues a Team Faces When Designing for FSG.

Category: General, 2014, Pat´s Corner

It is now 20 years since I saw my first Formula Student event, FSAE 1994 at the Pontiac Silverdome in the US. I was on a business trip in the USA and attended as a spectator. Pontiac Silverdome where the FSAE competition was...

25. June 2014

Scrutineering Podcast E04: Time to meet PERCY!

Category: General, Academy

Watch the next video as Ulf and Patrick explain the PERCY rule. Please make sure that you check these rules have been followed properly and your car complies to them before coming to the event to prevent disappointment in the...

25. June 2014

Scrutineering Podcast E03: The tractive system active light (TSAL)

Category: General, Academy

The tractive system active light (TSAL) test is one of the mandatory tests that will be carried out on EVERY electric car. Watch this video as Juergen demonstrates how the TSAL test will be carried out during the electrical...

10. June 2014

Pat’s Corner - Formula Student Tyres for Dummies

Category: Pat´s Corner

I had a phone call today from a team member who wanted to talk about tyres. He made the point that there is a lot of tyre information out there, including the data from the Tyre Testing Consortium, but little to tell you what it...

10. March 2014

Pat’s Corner - Bill Mitchell, Rules & Engine Choices

Category: Pat´s Corner

I had a timely reminder today that it is a long time since I wrote a new blog article. I guess getting involved with FS India and FS Russia has distracted me, but FSG is still my primary Formula event, so here...

24. September 2013

Welding at Formula Student - SLV-Workshop - 8th & 9th of November

Category: Academy

The Education and Research Academy for Welding Technology Mannheim Ltd. (SLV) has been responsible for supporting the Formula Student Teams in welding issues since the first Formula Student Germany event at the Hockenheimring in...

23. September 2013

2013 FSG Workshop at Bosch Engineering in Abstatt - 2nd of November

Category: Academy

The 2013 FSG workshop will be held at the Bosch Engineering facility in Abstatt on Saturday the 2nd of November. The workshop offers support and information to teams (planning on) participating in Formula Student Combustion or...

03. August 2013

Pat’s Live Corner starts today

Category: Competition, Pat´s Corner, 2013

Meet Pat in his corner @recreation.area in the FSG forum Saturday 14.00 – 17.00 Sunday 10.00 – 12.00 and 14.00 – 16.00

05. March 2013

Formula Student – Education or Motorsport?

Category: Pat´s Corner

In my life before Formula Student I was responsible for the technical area of CIK Karting, so I still maintain a passing interest in that sport. So last night I was reading the local Karting News. A couple of recent news items...

02. November 2012

Pat’s Seven Deadly Sins of FS Design

Category: Pat´s Corner

In my last blog, I mentioned that some ‘beginner errors’ are creeping back into the designs we are seeing from some very experienced teams. I will consider the following list as ‘deadly’ sins because they are likely to lead to a...

08. October 2012

The Summer of 2012

Category: Pat´s Corner

Well, the summer is finished and the FS season is over for another year, so it is time to review the highpoints of the year. FSG was another huge success. In order to reduce the workload on the staff, the night enduro for...

29. September 2012

Winner of the Media Award 2012

Category: Competition, FSG Award, 2012, Academy

The winner for the Media Award 2012 is UAS Berlin, car number 38! They have been awarded 10 free places to the FSG 2012 Workshop which will be held on the 27th October 2012 at BOSCH ENGINEERING in Abstatt, Germany.  They...

14. September 2012

2012 FSG Workshop at Bosch Engineering in Abstatt

Category: Academy

The 2012 FSG workshop will be held at the Bosch Engineering facility in Abstatt on Saturday the 27th of October. The workshop offers support and information to teams (planning on) participating in Formula Student Combustion or...

04. August 2012

Pat’s Corner Live

Category: Pat´s Corner

Today we have another first at Formula Student Germany: Pat’s Corner Live. All teams are invited to come by for advice from Pat Clarke. Feel free to bring along parts or a computer. A flat screen is available to display any...

18. April 2012

How the Judges Learn about this stuff

Category: Pat´s Corner

Warning! Historical stuff! I am often asked where I learned about this race car design stuff. Students want to know if they can learn the same way. The simple answer is ‘No’ because times and places have changed and we must...

05. April 2012

Welding at Formula Student – the SLV-Workshop - 18th and 19th of May

Category: Academy

The Education and Research Academy for Welding Technology Mannheim Ltd. (SLV) has been responsible for supporting the Formula Student Teams in welding issues since the first Formula Student Germany event at the Hockenheimring in...

05. April 2012

UVV Workshop on handling of high voltage systems in road vehicles tailored to Formula Student

Category: Academy

DEKRA offers a workshop on the handling of high voltage (HV) systems on board of road vehicles.  The workshop will be held on May 10th from 9:00 until 16:00 in Stuttgart, the language of the workshop will be German. The...

20. March 2012

Pat's Corner: Understanding what you are trying to achieve

Category: Pat´s Corner

Time for another column. I have been busy over the last few weeks writing my share of a new FS/FSAE book that will hopefully be published in time for FS UK in August. The book is being published by Racecar magazine in the UK and...

16. January 2012

Pat’s Corner

Category: Pat´s Corner

Well, 2011 has passed into history, so we are all a year older and hopefully a year wiser. I wish all teams around the world, the very best wishes for the New Year 2012. Whether you are building a FSC or FSE car, or a hybrid car...

12. November 2011

Electric Powertrains Workshop

Category: Academy

On December 2nd the FS Academy will offer a workshop focusing on electric powertrains. The workshop will be open for all teams planning to participate in FSE 2012. Experienced FSE participants and FSE staff will share their...

12. November 2011

Adhesive Bonding Workshop by Henkel

Category: Academy

Under the title “Fascination for bonding – Hightech solutions for extreme conditions” Henkel will organize again two two-day workshops for Formula Student teams at the Henkel Technology Centre in Garching Germany. In order to...

28. September 2011

Yearly FSG Workshop at Bosch Engineering in Abstatt

Category: Academy

The yearly FSG workshop for 2011 will be held at the Bosch Engineering facility in Abstatt on Saturday the 29th of October. The workshop offers support and information to teams (planning on) participating in Formula Student...

03. June 2011

Testing Times

Category: Pat´s Corner

The first major event of the FSAE/FS season has passed with Oregon State/GFR winning the FSAE event at Michigan International Speedway a couple of weeks ago. From my perspective the Michigan event was the best ever. This was...

23. March 2011

Welding at Formula Student – the SLV-Workshop - 6th and 7th of May

Category: Academy

The Education and Research Academy for Welding Technology Mannheim Ltd. (SLV) has been responsible for supporting the Formula Student Teams in welding issues since the first Formula Student Germany event at the Hockenheimring in...

13. March 2011

How to make a correct design and layout of your brake system?

Category: Pat´s Corner

It has been brought to our attention by one of our design judges that there is a very useful paper by prof. K.H. Bill on the complete layout and calculation of the brake system of a Formula Student race car. Here we would like to...

13. February 2011

FISITA Student Travel Bursary Programme

Category: Academy

In order to give engineering students a head start in the global automotive industry FISITA offers bursaries of up to €2000. The Student Travel Bursary Programme is meant to help students with the costs of taking part in...

26. December 2010

Pat’s final corner for 2010

Category: Pat´s Corner

Well, 2010 is almost finished, cold weather has spread over Europe and hopefully we have all been good little children and Santa Claus has been kind (he brought me a new DSLR and zoom lens) all the better to record ‘Design Error...

24. December 2010

Adhesive Bonding Workshop by Henkel

Category: Academy

As promised there would be some Christmas gifts. Here is one of them: Under the title “Fascination for bonding – Hightech solutions for extreme conditions” Henkel will organize two two-day workshops for Formula Student teams at...

02. December 2010

Chassis Stiffness and Compliance

Category: Pat´s Corner

In a recent email exchange with my fellow Chief Design Judge Steve Fox, the subject of ‘compliance’ came up. Steve wrote the following comment and it prompted this latest Tech Column. Compliance is something that… Their CADs...

08. November 2010

Engine Workshop

Category: Academy

On December 4th the FS Academy will offer a workshop focusing on engine technology. The workshop will be open for all teams planning to participate in FSG 2011. Experienced FSG participants will share their knowledge and past...

18. October 2010

FSC & FSE Workshop at DEKRA in Wart / Altensteig

Category: Academy

The yearly FSG workshop offering support and information to Formula Student teams participating in FSC and FSE will be held on the 20th of November at the DEKRA Academy in Wart / Altensteig. The workshop is open to all team...

10. July 2010

Steve’s Box (of tricks)

Category: Pat´s Corner

A guest article by Steve Fox, Chief Design Judge, FSG. Pat’s overheated keyboard needed a little cooling down time. So until his new liquid cooled keyboard comes in, I agreed to contribute a little something to keep you all...

28. June 2010

Pat's Corner – Design Reports

Category: Pat´s Corner

As the Design Reports for FSG 2010 come in, I am reviewing them with mixed feelings. Some are good, very good! And some are, well, not so good. I know I have stood on this soapbox many times and have actually published (with...

19. June 2010

SLV Workshop

Category: Academy

Ever since the first Formula Student Germany at the Hockenheimring in 2006 SLV has provided support in welding technology to teams participating in FSG. Therefore, on  the 14th and 15th of May 2010, a welding workshop was...

08. June 2010

Pat’s Corner – Safety

Category: Pat´s Corner

It has been a little while since my last column, due primarily to work pressures, but now we have FSAE Michigan out of the way, I can concentrate on FSG again.Congratulations to Oregon State University on winning both Design and...

30. April 2010

Welding at Formula Student – the SLV-Workshop

Category: Academy

The Education and Research Academy for Welding Technology Mannheim Ltd. (SLV) has been responsible for supporting the Formula Student Teams in welding issues since the first Formula Student Germany event at the Hockenheimring in...

08. December 2009

EuroMold Workshop

Category: Academy

Last Saturday, an FSG workshop took place at the EuroMold trade-fair in Frankfurt am Main. The workshop dealt with suspension design and set-up. It was the first FSG workshop targeting only one specific aspect of a Formula...

15. November 2009

Pat's Column - Car set up

Category: Pat´s Corner

Apologies to all for the lack of a column over the last few months. Insane work pressure has kept me away from home for 7 of the last 9 weeks. Last week had me in Adelaide where I witnessed the finish of the Solar Challenge. It...

06. November 2009

FSG & FSE Workshop at Bosch Engineering GmbH, Abstatt

Category: Academy

On Saturday October 31st the annual FSG workshop and the first FSE workshop took place at Bosch Engineering GmbH in Abstatt.  With nearly 300 students from 52 FS teams participating the workshop was  a great success.At...

07. October 2009

All you need to know about suspension design & setup

Category: Academy

On 5th December FS Academy will offer a workshop for FSG participants that focuses on suspension design and the way to the right setup for your car. The workshop will take place in the context of the EuroMold world fair at the...

05. October 2009

FSG & FSE Workshop at Bosch Engineering GmbH, Abstatt

Category: Academy

The yearly FSG workshop offering support and information to Formula Student teams will be held on 31st October 2009 at Bosch Engineering in Abstatt. The workshop is open to all team members. Experienced Formula Student...

06. May 2009

Pat's Column - Space-frame Chassis

Category: Pat´s Corner

I have never made any secret of my preference for space-frame chassis in FSG. This preference is not because of some nostalgic feeling, but for very pragmatic reasons. The thing I like most about a space-frame structure is that...

29. April 2009

Welding at Formula Student – the SLV-Workshop

Category: Academy

The Education and Research Academy for Welding Technology Mannheim Ltd. (SLV) has been responsible for the support of the Formula Student Teams in welding issues since the first Formula Student Germany event at the...

14. April 2009

Pat's Column - Relay Racing

Category: Pat´s Corner

Time for another column as we enter the Student Formula season, and the new Formula One season as the Brawn GP cars will start from the front row in Melbourne later today. It looks like an interesting season. I was invited to...

26. January 2009

Pat's Column - January

Category: Pat´s Corner

Well, 2009 is here and we are in the count-down to FSG in August. As Birgit has already reported, the available registrations filled up within 8 seconds when the registration server and nearly 40 teams were unable to register. ...

24. December 2008

Pat's Column - December

Category: Pat´s Corner

Well, the 2008 Formula year is finished. Last weekend saw the final event of the year, FSAE-Australasia. Stuttgart dominated FSAE-A finishing with 961 points from an available 1000 to finish a very successful year on a very high...

13. December 2008

Casting, Composites and Rapid Prototyping

Category: Academy

At 6th of December, the second Formula Student Germany workshop of the year took place at the EuroMold World fair in Frankfurt. The workshop aimed on supplying the visitors with specific knowledge in the area of casting,...

10. November 2008

All you need to know about Casting, Composites and Rapid Prototyping

Category: Academy

On 6th December FS Academy will offer a new workshop for FSG participants that focuses on production methods in casting, composites and rapid prototyping. The workshop will take place in the context of the EuroMold world fair...

09. November 2008

354 students attend FSG-Workshop at BMW Group in Munich

Category: Academy

At 8th of November, 354 students from 53 teams from Austria, Germany, Hungary, Japan, the Netherlands, Slovakia, Sweden and Switzerland attended the 4h FSG-Workshop held at BMW in Munich. FSG-Officials, industry experts and...

08. October 2008

FSG Workshop at BMW in Munich

Category: Academy

A workshop to support teams will be offered on 8th November 2008 by the Formula Student Germany at the BMW Research and Innovation Center (FIZ) in Munich. The speakers are experienced Formula Student participants and industrial...

08. October 2008

Tempus Fugit

Category: Pat´s Corner

Hello again. Well, Summer vacation is over, the leaves are changing colour and the European FS season is finished. A new academic year has started and teams should be starting to think about their next car. Stuttgart emerged as...

12. June 2008

Design Judging Stuff

Category: Pat´s Corner

Here it is, June already, with only one month to go until FSG. May saw the running of FSAE in Michigan and we must congratulate the winners there. Western Australia, Stuttgart and TU Munich stood on the podium, shutting out the...

16. April 2008

Risk = Hs x Hp

Category: Pat´s Corner

As we enter a new season of Formula Student competition, it is probably a good idea to talk about safety. Yeah, I know you guys are invincible, can stop bullets with your teeth and are totally impervious to injury. Truth is,...

28. February 2008

Pat's Column - February

Category: Pat´s Corner

Another month means another column, welcome back to Pat's Corner.I guess the most important that happened in the last month was the log jam that occurred when registration opened for FSG. The popularity of this event meant it was...

16. January 2008

Pat's Column - January

Category: Pat´s Corner

Firstly, welcome to 2008. My best wishes to all for a prosperous new year and I look forward to catching up with you all in August at Hockenheim.Seeing as I am currently on a short vacation, this months article will be a bit...

16. November 2007

370 students attend FSG-Workshop in Stuttgart;
open discussion during "round table"

Category: General, Academy

At 10th of November, 370 students from 37 teams attended the 3rd FSG-Workshop held at the University of Stuttgart. Industry experts and experienced FS-students gave lectures on technical subjects such as cooling or tires as well...

12. November 2007

Pat's Column - November

Category: Pat´s Corner

Another month passes by and congratulations are again due to Stuttgart for their victory in Italy. This is a noteworthy achievement for a team in their second year. Three events in 2007 for two wins and a second at Formula...

19. October 2007

FSG Workshop - Registration has started

Category: Academy

More details on the schedule and registration are published in the Formula Student - Academy area: http://www.formulastudent.de/academy/workshops/

08. October 2007

Pat's Column - October

Category: Pat´s Corner

Well, FSG 07 is finished, congratulations to Stuttgart, and it is time to start planning for next year. The first thing when planning a new project is to read the rules. There are always subtle changes, but for 2008, some...

18. September 2007

FSG Workshop 2007

Category: Academy

A workshop to support teams will be offered on 10th November 2007 by the Formula Student Germany at the University of Stuttgart. The speakers are experienced Formula Student participants and industrial experts. It is open to...

23. April 2007

Pat's Column - April

Category: Pat´s Corner

Hello again, one month closer to FSG and with FSAE at Detroit only a month away. Good luck and best wishes to all the FSG regulars who are competing in the USA this year.  We wish you well and hope you bring the Neil Schilke...

04. April 2007

Workshop at the "Deutscher Ingenieurtag" to prepare for FSG

Category: Academy

„The World in Motion – Mobility unites“ – this is the motto for the Day of Engineering at which experts will be discussing prospects and risks of future technologies on the 7th and 8th of May 2007 in Mannheim.

22. March 2007

Pat's Column - Rod Ends in Bending

Category: Pat´s Corner

“Rod ends in bending”.  How many times have we heard that phrase? Teams are told regularly that it is a design feature that must be avoided and there is an unwritten rule at all Formula Student or Formula SAE events...

01. March 2007

FSG-Academy | Fibre-reinforced Materials and Rapid Prototyping

Category: Academy

The international congress „Plastics in Automotive Engineering” will be held in the Congress Centre Rosengarten in Mannheim from the 21st to the 22nd of March. Over 1500 participants make this event a recognised institution...

26. February 2007

Pat's Column - February

Category: Pat´s Corner

Hello all, 60 entrants in FSG 2007! That is absolutely fantastic. FSG is very rapidly becoming the collegiate design competition of choice, especially in Europe. Long may it be! Another month has passed. It’s hard to believe...

14. January 2007

Pat's Column - January

Category: Pat´s Corner

Hello everyone. It is time to start planning for the next FSG competition, and so welcome to my first column for 2007. Firstly, I would like to offer everyone all the best wishes for a successful and happy new year. I will...

30. November 2006

360 participants registered for workshop

Category: General, Academy

360 participants have registered for the 2nd FSG workshop on the 2nd of December at the VW-AutoUni in Wolfsburg. They belong to a total of 46 teams. Apart from German, Austrian and Swiss teams, participants from Holland and...

26. October 2006

FSG Workshop 2006

Category: Academy

A workshop to support teams will be offered on 2nd December 2006 by the Formula Student Germany at Volkswagen AutoUni. The speakers are experienced Formula Student participants and industrial experts. It is open to all active...

20. May 2006

FSG at IdeenPark from the 20th May

Category: General, Academy

From the 20th to the 28th of May scientists, engineers and appliance workers will be presenting technology and innovations at the ThyssenKrupp IdeenPark. At the IdeenPark the team from the Technical University of Munich will be...

01. May 2006

PracDays 2006: registration closed

Category: General, Academy

11 Teams, 9 Cars, 123 Students registered for the PracDays at IdeenPark 2006 in Hannover

16. April 2006

Pat's Column - April

Category: Pat´s Corner

Hi everyone, Sorry for the delay since my last column, but I have been really busy at my ‘real’ job. With Easter being here, I have time to sit down and write some more for you. As you can imagine, I get requests for technical...

11. January 2006

Tyres

Category: Pat´s Corner

Last month I promised I would talk about tyres. The choice of tyre is one of the fundamental choices that should be made at the very first stage of design planning. Every facet of the car performance is reacted through the four...

11. January 2006

Pat's Column - January

Category: Pat´s Corner

Welcome again to Pats periodic ramble. The holiday season is all over and a new year has begun. Best wishes to all teams for the new season, and lets make FS Germany 2006 the best FSAE or FS event in the world. FSAE-A was...

04. December 2005

More than 250 students made first FSG workshop a success

Category: General, Academy

11 speakers from economy, science and experienced teams answered questions to organizational and technical topics at the first FSG Workshop. More than 250 students from Germany and Austria used this opportunity to discuss general...

26. November 2005

Workshop - 24 teams registered

Category: Academy

After the expiry for registration we are now awaiting 254 students from 24 German and Austrian teams for the first FSG Workshop. The information to be given by experts was equally a magnet for the students as the possibility to...

01. November 2005

Registration for FSG Workshop (updated)

Category: Academy
PreEvent 2005

Teams can register now for the Formula Student Germany workshop by e-mail to koetke@formulastudent.de. The mail should contain following data: 1. number of participants per team/university 2. contact person with e-mail and...

Displaying results 1 to 100 out of 105
<< First < Previous 1-100 101-105 Next > Last >>